Northern LED17ST User Manual - page 8
CAUTION
:
The wall mount must bear a minimum of five times the monitor’s net weight. To mount your MONITOR to
the wall or another surface, you need to purchase a VESA wall mount. Use four M4 x 8mm screws (the base attachment
screws removed in step 1 below are M4 x 8mm) to attach the mount. The monitor mount VESA hole pattern is 100mm x
100mm.
Note:
Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or the monitor may
be damaged).
Moun g Guide
Accessories
VGA Cable
Power Cord
HDMI Cable
For LED32
IR Remote Control
User Guide
Audio Cable
1. Before mounting the monitor, remove
the base riser (vertical portion of the base)
by removing the four screws near the top
with a screwdriver. Then the base and the
riser can be removed. In order to prevent
losing these screws, we suggest retaining
the screws if re-attaching the base is
needed at a later time.
2. Attach the VESA mount (200mm x 100mm)
plate to the rear of the monitor and follow all
of the instructions provided with the mount to
complete the mounting process.