Northern LED17ST User Manual - page 7
H-Position:
OSD horizontal position on the screen.
V-Position:
OSD vertical position on screen.
Duration:
OSD Menu timeout.
Halftone:
OSD Menu background opacity (allows viewing of the video behind the OSD menu).
Reset Defaults:
Restore monitor to factory default settings.
Version:
Displays firmware version number (not adjustable).
4. FUNCTION/GEOMETRY MENU
The HDMI, and BNC inputs share the FUNCTION menu. The VGA menu is labeled GEOMETRY
A. FUNCTION Menu
Adjustments
DLC:
Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen video.
Adjustments
H-Position:
Image Horizontal position
V-Position:
Image Vertical position
Clock:
Relative adjustment of horizontal scan rate
Phase:
Relative adjustment of synch
Auto Adjust:
Press SOURCE button to automatically adjust
settings to match input signal parameters
Press the MENU button to bring the menu on screen, and then up/down
buttons to move along the menu selections to highlight the FUNCTION
menu. Press the SOURCE button again to move between the left side
main menu se-lector into the window of menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu
se-lection within the sub-menu. Press the SOURCE button to enter the
selected item, you can now use the up and down buttons to adjust the
values. Press the MENU button to exit the sub-menu and return to the
main menu selector.
To exit the menu system, press the MENU button twice.
B. GEOMETRY Menu (VGA Only)
Press the MENU button to bring the menu on screen, and then up/down buttons to
move along the menu selections to highlight the GEOMETRY menu. Press the SOURCE button again to move between
the left side main menu selector into the window of menu choices and parameters. Use the up & down buttons to move
the yellow highlighted sub-menu selection within the sub-menu. Press the SOURCE button to enter the selected item,
you can now use the up and down buttons to adjust the values.
Press the MENU button to exit the sub-menu and return to the
main menu selector. To exit the menu system, press the MENU
button twice.