Northern Tool + Equipment NTEMP10 Owner's Manual - page 4
Step 5
Attach the rear axle assembly to the bed
frame using M8x20 carriage bolts (2), M8
flat washers (2) and M8 lock nuts (2).
Hand tighten.
Step 3
Attach the front struts (2) to the bed frame
using M8x20 carriage bolts (2), M8 flat
washers (2) and M8 lock nuts (2). Slide
the M8x20 carriage bolts through the bed
frame first and then through the struts.
Step 6
Slide the rear struts onto the rear
axle assembly and attach the
angled part of the strut to the bed
frame using M8x20 carriage bolts
(2), M8 flat washers (2) and M8
lock nuts (2). Tighten all
hardware securely.
Paso 5
Fije el ensamble del eje posterior a la
estructura de la plataforma con (2)
pernos cabeza de hongo M8x20, (2)
arandelas planas M8 y (2)
contratuercas M8. Apriete a mano.
Paso 3
Fije los (2) puntales frontales a la
estructura de la plataforma con (2)
pernos cabeza de hongo M8x20, (2)
arandelas planas M8 y (2)
contratuercas M8. Deslice los pernos
cabeza de hongo M8x20 a través de la
estructura de la plataforma y luego a
través de los puntales.
Paso 6
Deslice los puntales posteriores hasta el
ensamble del eje posterior y fije la sección
en ángulo del puntal a la estructura de la
plataforma con (2) pernos cabeza de
hongo M8x20, (2) arandelas planas M8 y
(2) contratuercas M8. Ajuste firmemente
todos los aditamentos.
Step 4
Next attach the front struts (2) to the
underside of the front axle assembly using
M8x20 hex head bolts (2), M8 flat washers
(2) and M8 lock nuts (2). Tighten all
hardware securely with socket set.
Paso 4
Luego, fije los (2) puntales frontales a
la parte inferior del ensamble del eje
frontal con (2) pernos cabeza de
hongo M8x20, (2) arandelas planas
M8 y (2) contratuercas M8. Ajuste
firmemente todos los aditamentos con
el juego de dados.
Step 5
Step 5
Step 6
Step 6
Paso 5
Paso 5
Paso 6
Paso 6
ntemp10manual.qxp 10/26/10 2:25 PM Page 7