NovaSail NS-START PRO Operating Manual - Gps Data Logger
12
GPS Data Logger
A GPS data logger is embedded in the
allowing you to
download all your sailing data to your computer using the
Wireless Manager PC app companion software.
Upon setting the GPS data logger start parameter, the logger will start recording
as soon as enough satellites are locked and/or when the timer reaches ‘0:00’.
The recording interval can be set using the parameter GPS Logger Timing (see
the SET mode, page 18 for details).
Waypoint screen mode: Wxx
The Waypoint screen is entered by pressing
.This mode displays
information such as the direction, angle difference, projected speed and distance
to reach the selected pre-defined waypoint. Up to 10 waypoints can be
memorized: W00 to W09. For each waypoint selected: the direction, the heading
difference between the boat and the direction to the waypoint, the projected
speed and the distance needed to reach it are displayed sequentially.
Note:
The display timings of the directions, angle, speed and distance are
defined by the parameters Waypoint Heading, Waypoint Speed, Heading
Difference and Waypoint Distance in the SET mode (also settable in the “NS-
START.Pro Novasail Wireles Manager” PC software). Please refer to the installed
online documentation for more details.
Note:
If all the display durations are set to ‘OFF’ the Waypoint screen mode will
be disabled.
To use a waypoint
•
By default, W00 is displayed on the mode line.
•
Press the button
to select the required waypoint, from W00 to W09.
•
The direction, speed, distance and heading difference are displayed
sequentially.