NovaSail NS-START PRO Operating Manual - Firmware Version: Ver
18
the line, when you face the start line, the displayed remaining distance is equal to
10-3.2 meters, 6.8 meters rounded down to 6 meters.
GPS Logger interval: LOG TIM
The GPS Logger recording interval can be set between 1 to 30 seconds with a
default value of 3 seconds. For example if set to 3, then every 3 seconds GPS
data is recorded. Once downloaded on your computer, the lower the value of the
interval the more accurate the trace and the post race analysis will be.
GPS Logger Start: LOG STA
•
OFF: GPS Logger is turned off
•
ON: The GPS Logger records the data when the
is ON and as soon as enough satellites are locked
•
TIM: The GPS Logger starts to record the data when the timer reaches 0
and continues until the timer is reset
Waypoint screen mode: data to waypoint display time
WAY HDG: display time for the heading to waypoint
WAY SPE: display time for the projected speed to waypoint
WAY DIS: display time for the distance to waypoint
WAY DIFF: display time for the heading difference to waypoint
Set the display time from 0 (OFF) to 10 seconds for the display of the data to
WAYPOINT: the values are shown consecutively on the lower line
Average time for the recorded max speed: SPE AVG
The max speed displayed in the information screen mode (see “Information
screen : max speed and average speed”, page 14) is averaged based on the time
entered, from 3 to 10 seconds.
Firmware version: VER
The firmware version is displayed (for example: 1.3).