Oce FX3000 SERIES User Manual - page 18

Configuring your network printer

8

2

If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will 

automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. For more information on 

APIPA, see Using APIPA to configure the IP address on page 82.

If the APIPA protocol is disabled, the default IP address of a Océ  print server is 192.0.0.192. However, you 

can easily change this IP address number to match with the IP address details of your network. For 

information on how to change the IP address, see Setting the IP address and subnet mask on page 9.

Subnet mask

Subnet masks restrict network communication.

Example: PC1 can talk to PC2

PC1 IP Address:192.168.1.2

Subnet Mask:

255.255.255.0

PC2 IP Address:192.168.1.3

Subnet Mask:

255.255.255.0

Note

0 denotes that there is no limit to communication at this part of the address.

In the above example, we can communicate with anything that has an IP address that begins with 

192.168.1.X

Gateway (and router)

A gateway is a network point that acts as an entrance to another network and sends data transmitted via the 

network to an exact destination. The router knows where to direct data that arrives at the gateway. If a 

destination is located at an external network, the router transmits data to the external network. If your network 

communicates with other networks, you may need to configure the Gateway IP address. If you do not know 

the Gateway IP address then contact your Network Administrator.