Oce FX3000 SERIES User Manual - page 86

Troubleshooting

 76

11

(5) Make the following selection. Make sure that your print server appears. If it is visible, then the 

connection is good. Otherwise, go to Step 5.

5

If you have tried 1 to 4 above and it does not work, then reset the print server back to the default factory 

settings and try from the initial setup again. For information how to reset to the default factory settings, 

see Restoring the network settings to factory default on page 31.

6

Check if a personal firewall such as ICF (Internet Connecting Firewall) for Windows XP is running on 

your computer. If it is running, temporarily turn it off and try again.

Note

If none of the above steps are successful, there is almost certainly a hardware or network problem!

(Mac OS

®

X 10.2.4 - 10.3.x)

(Mac OS

®

X 10.4)