Oce im3512 Operation Manual - 3-7
SPECIAL MODES
3-7
TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE
(2IN1)
This function allows you to reduce the size of original pages by one half to fit two pages evenly on one page when
transmitting.
Originals
Portrait original
Portrait original
Landscape original
Reduced to two pages
The arrangement
of the images
varies depending
on how the
original is placed
in the transmitting
machine.
The arrangement
of the images
varies depending
on how the
original is placed
in the transmitting
machine.
Landscape original
1st page
2nd page
3rd page
4th page
1st page 2nd page 3rd page 4th page
1st page 2nd page 3rd page 4th page
1st page
2nd page
3rd page
4th page
Your machine
Your machine
The other machine
The other machine
Transmission to
other machine
1st page
2nd page
1st page 2nd page
1st page 2nd page
1st page 2nd page
1st page 2nd page
11" x 17", 8-1/2" x 14", and 8-1/2 "x 13"
(A3 and B4) sizes cannot be
transmitted when using the 2 in 1
function. 8-1/2" x 11" (A4) and smaller
sizes can be used. There are
restrictions on how the originals are
placed. Both portrait and landscape
oriented originals should be placed
vertically as shown below.
USING THE AUTOMATIC
DOCUMENT FEEDER
USING THE DOCUMENT GLASS
Place the original vertically . If
placed horizontally
, an alarm
will appear.
8-1/2" x 11"
8-1/2" x 11"
NOTES
● After "2in1" is selected, the send size can be changed. For the procedure for changing the send size, see
page
2-17
.
● Transmission is not possible if the image is too large to fit into the transmission size.