Oce im5530 Scanning Manual - Receiving Internet Fax

Receiving Internet Fax    111

Receiving Internet Fax

The equipment accesses the E-mail server at specified intervals to check whether any E-mail 

has been delivered. If an E-mail has been delivered, the equipment will automatically retrieve 

and print out the E-mail.

When the [CHECK E-MAIL] button in the [USER] menu in the [USER FUNCTIONS] screen is 

pressed, the equipment manually accesses the E-mail server to check whether any E-mail has 

been delivered. If an E-mail has been delivered, the equipment receives and prints out the E-

mail.

Available Format:

The TIFF-FX images, TIFF images scanned by the scanner and the text data can be printed. In 

addition, the resolution of the TIFF-FX image must be 8 x 3.85, 8 x 7.7 or 8 x 15.4 (dot/mm). The 

resolution of the TIFF images scanned by the scanner must be 200 x 100, 200 x 200, 200 x 400, 

400 x 400 or 600 x 600 (dpi). If the received E-mail contains files that are not the ones described 

above, an error message will be displayed in the receive log.

To avoid such a case, you can print the report when an error occurs for E-mail printing and also 

forwarding this E-mail to another E-mail address can be set.

If you want to print the report when an error occurs for E-mail printing, set up “Enable Print E-

mail Error”.

If you want to forward the E-mail to another E-mail address when an error occurs, set up 

“Enable E-mail Error Forward” and “E-mail Error Transfer Address”.

See the “Setting up the E-mail Print” in the 

Printer Utility Guide

.

Receiving Automatically

To automatically receive the Internet Fax from the E-mail server, set up the “Scan Rate” in the 

POP3 Network Service setting using Printer Utility.

Checking whether any E-mail has been delivered at specified intervals will be performed auto-

matically. (Default setting: every 5 minutes) 

For setting the “Scan Rate”, see 

Printer Utility Guide

.

Receiving Manually

1

Press the [USER FUNCTIONS] button on the control panel.