Oce TCS500 Self Support Manual - page 9
Define the correct job settings for optimal output quality
Introduction
To get optimal output quality, define the correct print modes.
Use the following order to define the print modes.
1.
Define the correct media settings.
The website http://supplies.oce.com includes information about the correct media settings
for your jobs.
2.
Define the correct 'Color mode'.
3.
Define the correct 'Print quality'.
Chapter 8 of the user manual includes information about the recommended job settings
for your jobs.
Definition
Define the correct color mode
Define the correct color mode
#
Then
When
set the 'Color mode' to 'Color'
The original is in color and the printed
output requirement is color
set the 'Color mode' to 'Grayscale'
The original is in color and the printed
output requirement is grayscale
set the 'Color mode' to 'Grayscale'
The original is grayscale
Define the correct print quality
Define the correct print quality mode
#
Example
Then
When
Use this mode, for exam-
ple, to check if all the in-
formation is visible on the
printed output.
Set the 'Print quality' to
'Check'
Speed is the most impor-
tant requirement.
Use this mode, for exam-
ple, to approve bid-sets or
for internal releases of
drawings
Set the 'Print quality' to
'Release'.
The speed requirement
and the print quality re-
quirement are balanced.
Chapter 1 - Self support tips (GB)
9
Define the correct job settings for optimal output quality