Oce VarioPrint 6000 MICR+ series User Manual - page 9
•
LCD display. Do not rub, press, or touch the display surface with hard material, be-
cause the polarizer at the surface can be easily scratched. The LCD module consists
of glass. Therefore, the LCD module can be damaged when you drop, pinch strongly,
or punch the module. If glass breaks, be careful not to injure yourself on the glass
fragments. Call Océ Customer Service.
Consumables, Supplies and Maintenance Materials
Warning
•
Do not throw toner cartridges or toner into an open flame.
Caution
•
Do not leave a toner unit or drum unit within reach of children.
•
Always use the materials recommended by the manufacturer that are developed for
this machine. Materials not approved by the manufacturer may result in damage to
your machine.
Moving the Machine
Caution
•
Make sure that you disconnect the power cord and other cables before you move the
machine.
•
Make sure that you check the documentation for the space requirements before you
move the machine.
Holidays
Caution
•
Unplug the machine if you will be using it for a long period of time.
Key operator maintenance
A part of the key operator maintenance tasks can be performed in the hot area of the
machine. These are:
•
Replace the spiral cleaner
•
Replace the TTF belt
•
Cutting the sheet cleaner
•
Clean the glue cleaners
•
Solve paper jams.
There are two ways to protect your hands against heat:
•
Use the heat-resistant gloves that are supplied with the printer, or
•
Work on the machine after it has cooled down. If you do not have a 24-hour work
shift, the printer will provide you with a schedule for replacing parts in the morning
before the machine warms up.
Chapter 1 - Safety information
9
Instructions for safe use