Oceanic VEO 1.0 Operating Manual - page 13

13

Low Battery

Voltage level is checked upon activation and every minute dur-

ing operation on the surface.

•  When voltage decreases to the warning level (2.75 volts), 

the icon is displayed solid on the Surface Main (Fig. 7a).

•  Upon decreasing to a voltage level that will no longer sus-

tain proper operation (2.50 volts), the icon will flash 5 times 

and the unit will shut off.

•  If a low battery condition exists when the unit is activated 

(by pressing the button), the graphic bAT and the icon will 

appear flashing for 5 seconds and the unit will shut off.  

•  If the button is not pressed to activate the unit prior to a dive, 

and a low battery condition exists, the icon will appear flash-

ing as a warning upon descent to 5 FT (1.5 M) and no other 

information will be displayed.

•  If a low battery condition occurs during a dive, there will 

be sufficient battery power to maintain operation for the 

remainder of that dive.  The icon will appear, with the graph-

ics CHG and BAT alternating (Fig. 8), after the dive when 

operation enters Surface Mode.

Fig.7-LOWBATTERY

WARNING

a

Fig.8-LOWBATTERY

(occurredduringdive)

altw/

BAT