Oceanic VEO 1.0 Operating Manual - page 26
26
PDPS, information includes (Fig. 24A, B):
> Plan Depth value with FT (or M) icon
> Dive Time allowed with NDC (or O2) and min icons
> Max Depth allowed for the PO2 alarm value set with MAX
and FT (or M) icons, blank set for Air
> FO2 Set Point, graphic Air or numeric value (21 to 50),
with FO2 icon
> (PZ+) icon, if selected, no icon if Dsat is selected
> NX icon, blank if Air
• B (< 2 sec repeatedly) to step upward through PDPS screens
one at a time from 30 to 190 FT (9 to 57 M) in increments
of 10 FT (3 M), continuing the step through until exit from
the PDPS.
• B (2 sec), at any time, to exit the PDPS and revert to the
Plan Lead-in screen.
FO2 MODE
FO2 and the FO2 50% Default are described on pages 14/15.
To access Set FO2, depress B for 2 seconds while the Plan Lead-
in screen is displayed or 4 times while viewing Surface Main.
SURF Main >> Log >> Fly >> Plan >> Set FO2
Fig.24-PDPS
(FO2setforNitrox)
Fig.24-PDPS
(FO2setforAir)