Octane Fitness PRO4700 Assembly And Operation Instructions Manual - page 4
3
D. Console
Remove original CSAFE cable (white, 5-pin
cable under keypad) and replace with the 900
MHz Receiver/CSAFE cable included in this kit.
Route cables (Qty 7) through mast plate.
Match cable connectors to sockets on console
back; connect.
Note: White 8-pin socket on
console back and audio jack are not used for
900MHz (800MHz) installation.
Attach console and covers to mast plate with
C-1 (Qty 4).
E. User Settings
Pedal the unit to activate the keypad for
programming.
Press and hold
/
to display programming
options.
Press
Enter
to view setting options as
described on following page; press
to select
option and move to next setting. (Factory
setting shown in
BOLD
.)
Press
Enter
when “Exit” is displayed to save
selections. Press
Pause Clear
twice to exit
without saving changes.
I. Complete Installation
Replace top cover and left side shroud, or
return to PRO4700 Assembly Instructions to
complete assembly of new unit.
Fan
(white, 2-pin)
Heart Rate
(white, 3-pin)
Console Ground
(metal; green wire)
900
MH
z Receiver/C-SAFE
(white, 5-pin)
Console to Base
(white, 14-pin)
Handlebar Control
(white, 6-pin)
Keypad
(black, 14-pin)
Keypad
(black, 14-pin)
Console to Base
(white, 14-pin)
Fan
(white, 2-pin)
Heart Rate
(white, 3-pin)
Console Ground
(metal; green wire)
Handlebar Control
(white, 6-pin)
900MHz Receiver/C-SAFE
(white, 5-pin)
Unused
(audio jack)
Unused
(white, 8-pin)
Reserved for
Software Update
(black)
Auto Adjusts to
Your Activity
Focus on Push and
Pull of Upper Body
Like a Personal
Trainer
Focus on Lower Body
Using Stationary Arms
Customize Your
Stride Length
PRESS AND HOLD
VIEW OPTIONS
EXIT AND SAVE
EXIT
WITHOUT
SAVING
EQ