Odys DPF-Shine User Manual - page 5
ODYS DPF-Shine
5/8
EN
•
Don’t change the SD / MMC/MS card while Picture Frame is powered on!
If you want to change the card turn the power off at first.
•
Please insert the card in a correct direction. Do not apply too strong a force when inserting
the card to prevent damaging the card or the component of digital photo frame. Please
check for a correct inserting direction if it can not be done.
•
Don't insert or pull out the saving card while reading information.
Turn on or off the screen
When you do not want to view the photos momentarily, you can press the button to turn off the screen for
saving power. To turn on the screen, press the
button again.
View Photos
Step 1: Connect the device to a wall outlet with the AC adaptor.
Step 2: The device should start immediately and display the main menu.
Photo – Display photos
Calendar – Display the calendar
Setting – System Setting
Step 3: Insert a USB flash disk into the USB port or a memory card into the
card slot.
Step 4: Press the (up) / (down) button to select “Photo” and then press
the “Mode” button to confirm. The slide show should start automatically.
Step 5: Press the “Mode” button to show the tool bar. Press the / button
to select a button from the tool bar and then press “Mode” button to confirm.
Previous/next
Select
to display the previous photo.
Select
to display the next photo.
Slide Show
Select
/
to start or stop slide show.
Rotate the picture
Select
to rotate the picture clockwise by 9
0°.
Change the Aspect Ratio
Select
to change the aspect ratio between 4:3, 16:9 and
Original.
Display photo information
To display information (photo name, format, size etc.) about the photo, select “
”.
Please disconnect the device from the power source when not to be used for longer periods of
time. Doing so will save energy and extend the life of the device.
If you insert both, only pictures stored in the memory device that
you inserted firstly are displayed.
Zoom in/out
Select
to zoom in or zoom out the picture to
0.5, 0.7, 1, 1.5 and 2X. When the photo is
enlarged, you can press the ,, and
button to roam on the photo. Pressing the ESC
button will restore the picture to original size.