Odys DPF-Shine User Manual - page 7
ODYS DPF-Shine
7/8
EN
Press the and button to select a setting item.
Press the / button to change the option for the selected setting.
Press the ESC button to confirm setting and exit.
Transition Effect – Set transition effect of the slide show
Slideshow Interval – Set time interval between slides.
Startup Mode – Set the first mode that you see when the device starts up.
Language – Set the language of the on-screen texts
Alarm – Set the alarm time
Clock – Set the time
Date – Set the date
Update – Update the software
Reset – Restore the system settings to default
About – Display the software version information
Firmware Upgrade
To get the latest version of software,
(1) Obtain the upgrading file.
(2) Copy the upgrading file to the root of a memory device.
(3) Insert the memory device into the photo frame.
(4) Enter the system setting mode, press the button to select “Update” and then press the “Mode” button
to continue.
(5) Press / to select “Yes” and then press the Mode button to confirm.
(6) Wait for the upgrading to complete and do not interrupt the progress.
(7) The device restarts when the upgrading is finished.
Troubleshooting
The digital picture frame cannot be powered
on.
· Make sure that the AC adapter is
connected securely to the frame and the
power source.
Remote control does not work
· Ensure that a working battery is inserted
The images can not be displayed.
· Make sure the image file is in a supported
formats.
The image is distorted or blurred.
· Resolution of the image is too low. Try
playing a file with a higher resolution. 480
X 234 (RGB) is recommended.
Responds of the device is too slow
There are too many files in the memory
device.
Technical Specifications
Item
Description
Display
7.0-inch LCD screen
USB Interface
USB 2.0 Host(High Speed)
Photo Format
JPEG
Supported Memory Card
SD/MMC/MS
Image Resolution
480X234 pixel
Memory Card Capacity
4GB (MS/SD Up to 4GB, MMC Up to 2GB)
USB Flash Disk
Up to 8GB
Power Supply
AC Adapter, Input 100-240V, Output 5V
Storage Temp*
-20
℃ ~ +55℃
Ambient Temp*
0
℃ ~ +55℃
Operation Relative Humidity*
20%
~ 90%(40℃)
Storage Relative Humidity*
20%
~ 93%(40℃)