DL manuals
OHAUS
Scales
4000W Series
Instruction Manual

OHAUS 4000W Series Instruction Manual - Valor

Other manuals for 4000W Series: Instruction Manual

Page of 22

Download

Print this page

Bookmark us

Valor

™ 4000W Series EN-19

Disposal

In conformance with the European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE) this device may not be

disposed of in domestic waste. This also applies to countries outside

the EU, per their specific requirements.

The Batteries Directive 2006/66/EC introduces new requirements

from September 2008 on removability of batteries from waste

equipment in EU Member States. To comply with this Directive, this

device has been designed for safe removal of the batteries at end-of-

life by a waste treatment facility.

Please dispose of this product in accordance with local regulations at the collecting

point specified for electrical and electronic equipment. If you have any questions,

please contact the responsible authority or the distributor from which you

purchased this device.

Should this device be passed on to other parties (for private or professional use),

the content of this regulation must also be related.

Disposal instructions in Europe are available online at

europe.ohaus.com/europe/en/home/support/weee.aspx.

Thank you for your contribution to environmental protection.

FCC Note

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

Industry Canada Note

This Class B digital apparatus complies with Canadian ICES-003.

ISO 9001 Registration

In 1994, OHAUS Corporation, USA, was awarded a certificate of registration to ISO

9001 by Bureau Veritus Quality International (BVQI), confirming that the OHAUS

quality management system is compliant with the ISO 9001 sta

ndard’s

requirements. On June 21, 2012, OHAUS Corporation, USA, was re-registered to

the ISO 9001:2008 standard.

Product Registration

Protect your investment. Register your product with your local OHAUS dealer or

online at www.ohaus.com.

« ‹ Prev 16 17 18 19 20 21 22 Next › »

Summary of 4000W Series

Page 1
Valo r™ 4000w series instruction manual.
Page 3: Valo
Valo r™ 4000w series en-1 1. Introduction this manual contains installation, operation and maintenance instructions for the valor™ 4000w series. Please read the manual completely before using the scale. 1.1 safety precautions please follow these safety precautions: verify that the ac adapter input v...
Page 4: En-2
En-2 valo r™ 4000w series 2.3 selecting the location use the scale on a clean, firm and flat surface. Avoid locations with excessive air current, vibrations, heat sources, or rapid temperature changes. 2.4 leveling the equipment adjust the leveling feet so the bubble is centered in the circle. Be su...
Page 5: Valo
Valo r™ 4000w series en-3 2.5.1 battery power: the scale can be used on ac power immediately. Allow the battery to charge for 12 hours before using the scale on battery power. The scale will automatically switch to battery operation if there is a power failure or the power cord is removed. With ac p...
Page 6: En-4
En-4 valo r™ 4000w series 3. Operation 3.1 controls figure 3-1. Front control panel valor 4000w with display table 3-1 button functions short press 1 (when on): sets display to zero short press (when off): turns scale on long press 2 (when on): turns the scale off short press (in menu): selects / ac...
Page 7: Valor
Valor ™ 4000w series en-5 display table 3-2 display symbols item description item description 1 net symbol 9 calibration / menu mode symbol 2 center of zero symbol 10 dynamic symbol* 3 negative symbol 11 battery charge symbol 4 stable weight symbol 12 pound, ounce, pound:ounce symbol 5 preset tare s...
Page 8: En-6
En-6 valo r™ 4000w series 3.2 turning scale on/off to turn the scale on, press the on/zero off button. The scale performs a display test, momentarily displays the software version, and then enters the active weighing mode. To turn the scale off, press and hold the on/zero off button until off is dis...
Page 9: Valor
Valor ™ 4000w series en-7 3.5 percent mode this mode measures the weight of a sample as a percentage of a reference weight. 1. Press and hold mode until [percnt] is displayed. [clr.Ref](clear reference) will then display. Notes: press function to view the current reference weight. If there is no ref...
Page 10: En-8
En-8 valo r™ 4000w series 3.7 accumulation accumulation works together with each application mode. This function allows the user to store the total of a series of weight measurements. 1. Press the m+ key to add the weight to the accumulation data. The Σ icon will keep flashing until the weight is re...
Page 11: Valor
Valor ™ 4000w series en-9 4. Menu settings the user menu allows the customizing of scale settings. 4.1 menu navigation user menu: menu: c.A.L s.E.T.U.P r.E.A.D m.O.D.E u.N.I.T l.O.C.K e.N.D menu items: span lin geo end reset pwr.Un a.Tare ir.Func ir.Adj accum end reset stable filter azt light sleep ...
Page 12: En-10
En-10 valo r™ 4000w series 4.3 setup menu enter this menu to set scale parameters. Reset [reset] (no, yes) reset the setup menu to factory defaults. Power on unit [pwwr.Un] (auto, kg, g, lb, oz, lb:oz) set the unit of measure displayed at startup auto tare [a.Tare] (off, on, on-acc) set the automati...
Page 13: Valor
Valor ™ 4000w series en-11 4.5 mode menu enter this menu to activate modes so they will be available for use with the mode button. Weigh mode is always active by default. Reset [reset] (no, yes) reset the mode menu to factory defaults. Percent [percnt] (off, on) set the status. Check [check] (off, o...
Page 14: En-12
En-12 valo r™ 4000w series table 4-1. Geo codes 0 325 650 975 1300 1625 1950 2275 2600 2925 3250 325 650 975 1300 1625 1950 2275 2600 2925 3250 3575 0 1060 2130 3200 4260 5330 6400 7460 8530 9600 10660 1060 2130 3200 4260 5330 6400 7460 8530 9600 10660 11730 0°00' 5°46' 5 4 4 3 3 2 2 1 1 0 0 5°46' 9...
Page 15: Valor
Valor ™ 4000w series en-13 4.9 legal for trade when the scale is used in trade or a legally controlled application it must be set up, verified and sealed in accordance with local weights and measures regulations. It is the responsibility of the purchaser to ensure that all pertinent legal requiremen...
Page 16: En-14
En-14 valo r™ 4000w series 4.9.3 verification and sealing the local weights and measures official or authorized service agent must perform the verification procedure. 4.9.3.1 physical seals for jurisdictions that use the physical sealing method, the local weights and measures official or authorized ...
Page 17: Valor
Valor ™ 4000w series en-15 the audit trail information is displayed in the format cfgxxx and calxxx. The scale then returns to normal operation. 5. Maintenance 5.1 cleaning the housing may be cleaned with a cloth dampened with a mild detergent if necessary. Do not use solvents, chemicals, alcohol, a...
Page 18: En-16
En-16 valo r™ 4000w series 5.3 troubleshooting the following table lists common problems and possible causes and remedies. If the problem persists, contact ohaus or your authorized dealer. Table 5-1 symptom possible cause remedy cannot turn on no power to scale battery discharged verify connections,...
Page 19: Valor
Valor ™ 4000w series en-17 6.1 specifications table 6-1 model v41pwe1501t v41xwe1501t v41pwe3t v41xwe3t v41pwe6t v41xwe6t v41pwe15t v41xwe15t capacity x readability (max x d non-approved) 1.5 kg x 0.0002 kg 1500 g x 0.2 g 3 lb x 0.0005 lb 48 oz x 0.01 oz 3 kg x 0.0005 kg 3000 g x 0.5 g 6 lb x 0.001 ...
Page 20: En-18
En-18 valo r™ 4000w series 6.3 compliance compliance to the following standards is indicated by the corresponding mark on the product. Mark standard this product conforms to the emc directive 2004/108/ec, the low voltage directive 2006/95/ec and the non-automatic weighing instrument directive 2009/2...
Page 21: Valor
Valor ™ 4000w series en-19 disposal in conformance with the european directive 2002/96/ec on waste electrical and electronic equipment (weee) this device may not be disposed of in domestic waste. This also applies to countries outside the eu, per their specific requirements. The batteries directive ...
Page 22: En-20
En-20 valo r™ 4000w series limited warranty ohaus products are warranted against defects in materials and workmanship from the date of delivery through the duration of the warranty period. During the warranty period ohaus will repair, or, at its option, replace any component(s) that proves to be def...