Oki B2500 User Manual - 4 - Parameters/setup
B2500
- 16 -
4 - Parameters/Setup
Switches your machine to standby
mode (ECO)
The machine will switch to standby mode when not being
used. You can choose the time before the machine
switches to stand by (it is set in minutes).
You can choose with the setup WITHOUT, DELAY 5 MIN,
DELAY 15 MIN, DELAY 30 MIN.
▼
29 - SETUP/TECHNICALS
1 Press on
▼, press on OK.
2 Select TECHNICALS with the
▼ or ▲ buttons and
confirm with OK.
3 Select 08 with the
▼ or ▲ buttons and confirm with
OK.
4 Quit this menu by pressing the
button.
Save your toner cartridge
This function allows you to increase the lifetime of your
toner cartridge.
▼
29 - SETUP/TECHNICALS
1 Press on
▼, press on OK.
2 Select TECHNICALS with the
▼ or ▲ buttons and
confirm with OK.
3 Select 80 with the
▼ or ▲ buttons and confirm with
OK.
4 Choose the parameter WITH with the
▼ or ▲
buttons and confirm with OK.
5 Quit this menu by pressing the
button.
Setup the printing format
The default setup is NO. You can print a document in a
LETTER format on A4 pages by setting up this parameter
on LETTER/A4.
▼
29 - SETUP/TECHNICALS
1 Press on
▼, press on OK.
2 Select TECHNICALS with the
▼ or ▲ buttons and
confirm with OK.
3 Select 93 with the
▼ or ▲ buttons and confirm with
OK.
4 Choose the parameter LETTER/A4 with the
▼ or
▲ buttons and confirm with OK.
5 Quit this menu by pressing the
button.
Declare the number of authorised
WEP keys
You can create a network with WEP keys to allow several
personal computers to use the machine as a network
printer.
You can authorise up to 4 WEP (Wired Equivalent
Privacy) on your machine.
To declare the number proceed as follows:
▼
29 - SETUP/TECHNICALS
1 Press on
▼, press on OK.
2 Select TECHNICALS with the
▼ or ▲ buttons and
confirm with OK.
3 Select 96 with the
▼ or ▲ buttons and confirm with
OK.
4 Enter the desired key number (4 maximum),
confirm with OK.
5 Quit this menu by pressing the
button.
Setup the display language
You can select another language for the menus display.
By default, the machine operates in the English language.
▼
203 - SETUP/GEOGRAPHICAL/LANGUAGE
1 Press on
▼, enter 203 with the keyboard and
confirm with OK.
2 Choose the desired language with the
▼ or ▲
buttons and confirm with OK.
3 Quit this menu by pressing the
button.
Setup of the default paper format
This menu allows to setup the default paper format to be
used for printing.
856 - ADVANCED FCT/SCAN. & PRINT/
PAPER FORMAT
1 Select the default paper size with the
and
buttons within the following choices: A4, A5,
LETTER and LEGAL.
2 Confirm by pressing the OK button.
3 Quit this menu by pressing the
button.