Oki C9655d User Manual - Lcd
Control panel > 26
LCD
PANEL
MESSAGES
The LCD panel messages, supplemented by the Help messages where appropriate, are
intended to be self-explanatory. More information on typical messages is provided in
“Appendix A – LCD messages” on page 69
.
U
SING
THE
MENUS
The
Enter, Up-arrow, Down-arrow and Back buttons are used to move through the
printer menus. You can adjust settings (e.g. set the paper size for Tray 1) or view
information (e.g. how much is left of a selected consumable).
Many of these menu settings can be, and often are, overridden by settings in the Windows
printer drivers. However, several of the driver settings can be left at “Printer Setting,”
which will then default to the settings entered in these printer menus.
The steps involved in using the menus are typically as follows:
1.
Ensure that the LCD panel indicates that the printer is ready to print.
2.
Enter User menu mode by pressing either the
Enter button or the Up-arrow or
Down-arrow button and press the latter two repeatedly as required until the
desired menu is highlighted in the displayed list.
3.
Press the
Enter button to select this menu.
4.
Press the
Up-arrow or Down-arrow buttons repeatedly until the desired Item is
highlighted.
5.
Press the
Enter button to select this Item.
6.
Press the
Up-arrow or Down-arrow buttons repeatedly until the desired Value is
highlighted.
7.
Press the
Enter button to select this Value. (If you are setting a parameter, ensure
that an asterisk (*) appears beside the selected parameter Value.)
8.
Press the
Online button to exit menu mode and return to the ready to print status.
Refer to the section entitled
for examples of using the menus.
NOTE
Menu details are given in
“Appendix B – menu system” on page 70
reference.