Oki Okicolor8 Specifications - page 12

|

OKICOLOR 8

12

• Install the printer near an easily accessed power outlet.

• Avoid damaging the power cord.  Do not put anything on

it or place it where it will be walked on. If the cord

becomes damaged or frayed, replace it immediately.

• If you are using an extension cord or power strip with the

printer, make sure that the total of the amperes required by

all the equipment on the extension is less than the

extension’s rating. The total ratings of all equipment

plugged into the outlet should not exceed 15 amperes.

• Do not poke anything into the ventilation slots of the

printer.  You could get an electrical shock or cause

hazardous electrical arcing, which could cause a fire.

• Aside from the routine maintenance described in the

documentation, do not try to service the printer yourself.

Removing the cover may expose you to shocks or other

hazards.

• Do not make any adjustments other than those outlined in

the documentation.  You may cause damage that will

require extensive repair work. The provided

documentation explains how to get your printer serviced

by qualified Oki Data technicians.

If anything happens that indicates that your printer is not

working properly or has been damaged, unplug it

immediately and follow the procedures in the provided

documentation for having your printer serviced.

Here are some of the things to look for.

• The power cord or plug is frayed or damaged.

• Liquid has been spilled into the printer, or the printer has

been exposed to water.

• The printer has been dropped, or the cabinet is damaged.

• The printer does not function normally when you are

following the operating instructions.