Oki OKIFAX 5400 Option Installation Manual
Other manuals for OKIFAX 5400:
Service Manual, Handbook, Quick Reference, Installation Manual, User Manual, User Manual, Maintenance Manual
of
2
Installation V34 Modem PCB in OKIFAX 5400
A) Disassembly Procedure
•
Make sure the fax machine is switched off.
•
Open the Document Guide assembly.
•
Open the Stack Cover by pressing the two buttons.
•
Take out the drum cartridge (ID Unit).
Caution: Do not touch the green surface in the ID Unit. To protect the
ID Unit from light, place the ID Unit in a dark plastic sack.
•
Remove the two screws 1.
•
Remove the Rear Cover by removing the two screws 2.
•
Remove the NCU Cover by removing the screw 3.
•
First, open the Main Cover from the front side, and then remove the Main Cover
by removing the nails at both sides on the rear side.