Oki OKIOFFICE 87 Setup Manual - page 17
English
OKIOFFICE 87
9
to it. See the ‘Answering Mode Options’ section in the User’s Guide on the
CD to select the mode you require.
To change the Answering Mode:
1.
Press the AUTO REC key. Your machine displays your current
answering mode.
2.
Continue pressing the AUTO REC key until the answering mode
you want appears on the display. After a short pause, your
machine programs the new answering mode and returns to stand-
by mode displaying the new answering mode setting.
Setting Machine Identification
The machine uses the information you enter here to identify itself during
communications. In most countries programming this information into
your machine is a legal requirement.
1.
Press the SELECT FUNCTION key then the USER PROG One
Touch key followed by 4 on the numeric keypad. The display
shows:
4:SYSTEM DATA PRG
YES (
Å
Å
Å
Å) NO (Æ
Æ
Æ
Æ/1-7)
2.
Press the YES key. The display shows:
NO=
ID=
3.
After the display clears, enter the full telephone number of your
fax machine using the numeric keypad up to twenty characters.
Use the HYPHEN or 8/+ One Touch key to enter a “+” character
before the number to indicate the international access code before
the country dialling code. The 9/SPACE One Touch key is used to
enter spaces in a number.
4.
Press the START key to save your entry.
5.
Enter your Sender ID. This is a descriptive title up to 32
characters long. See ‘Setting Machine Identification’ section in
the User’s Guide on the CD for instructions on entering special
characters.
6.
Press the START key to save your entry. The display shows:
NO=
87SGB.book Page 9 Friday, December 22, 2000 10:58 AM