Oki OKIPAGE 4M Help Manual - page 15
15
Help Guide
English
Software Problems (Windows)
It is essential to ensure that you have installed the correct
Oki printer drivers. If printing from a DOS box your
application should be set up for printing with an HP LaserJet
II or compatible driver.
Problem:
Printing is garbled.
Solution:
Incorrect driver is installed or selected. Install
or select Okidrivers provided with printer.
Problem:
Printer’s output is below rated speed.
Solution:
Much of the printing delay will be caused by
your application. Complex graphic images
may take longer to prepare for printing than
simple text documents.
Software Problems (Macintosh)
Problem:
Chooser does not show OKIPAGE 4m after
installation.
Solution:
(1) Macintosh must be restarted after
installation.
(2) Printer should be switched on before
Macintosh.
(3) QuickDrawGX is not compatible with
printer driver, and should be removed.
(4) MacOS must be 7.1.1 or later.
Problem:
Unable to print. Message box reads “Cannot
identify OKIPAGE 4m.”
Solution:
(1) Use the chooser to ensure that you have
selected the current (modem or printer)
output port.
(2) Check that printer was switched on before
Macintosh.
(3) Check that printer cable is plugged in
securely.
4wPhgb.p65
7/14/97, 10:55
15