Oki S900 Engineer's Installation Manual - Note
INSTALLING THE SCANCOPIER (AND ADF) > 27
English
SETTING UP ADDITIONAL SETTINGS
When you press the Additional Settings button, ensure that the
following menu and factory default settings appear in the LCD display:
0. PIN Setting: Disable
1. Printer Profile: ES3037 (7)
2. Media Type: Plain Paper
3. Duplex: OFF
4. Staple: OFF
5. Hole Punch: OFF
6. Output Tray: Top Output (Face down)
7. Multi-Purpose Tray: ON
8. Collate: ON
9. Paper Tray: Tray1
10. Power Saving Mode: 30Min.
11. Paper Supply: Std Paper
At this point, change the Printer Profile setting, if required, to match
the user’s printer. (See Appendix A, and if required, Appendix C.)
NOTE
The menu shown is that displayed when all printer options are installed.
Printer options that are not installed do not appear on the menu. If there
is a change in the condition of an option, the settings will be returned to
the factory default values.