Oki S900 Engineer's Installation Manual - Note
28 < INSTALLING THE SCANCOPIER (AND ADF)
INSTALLING UTILITIES FROM THE CD-ROM
To operate the S900 at optimum speed for scanning, the following
minimum requirements are recommended:
IBM compatible PC (Pentium or later);
Microsoft Windows 98/Me, Windows 2000/XP;
One USB port available;
100 Megabytes of available hard disk space for installation;
128 Megabytes of RAM (256 Megabytes or higher
recommended);
VGA monitor;
A Microsoft Windows-compatible pointing device (e.g.,
a mouse);
A CD-ROM drive.
For minimum system requirements for Unimessage Pro operation,
refer to the Unimessage Pro User’s Guide on the CD supplied with the
Scancopier.
Follow the steps below:
1.
Start Microsoft Windows.
2.
Insert the Utilities and Documentation CD-ROM into your CD-
ROM drive.
3.
The CD-ROM will autolaunch on most systems. However, if
your system does not support autolaunching CD-ROMs, press
the Start button, choose RUN, type d:\setup.exe (d: the CD-
ROM drive in use), and then click OK.
4.
Double-click on your language.
NOTE
A full software installation is to be carried out, even if the user does not
intend to use Unimessage Pro.