P44 Chair-Mounted Stepper User Manual - page 6
LCD Operation: Setting the Resistance
9
L
C
R
WELCOME TO P44
BETTER MOTION 4 LIFE
Press any of the three keys to turn
the LCD on and the following
message will appear. Press any
key again to set the resistance.
L
C
R
FORCE LBS C = OK
PUSH R FOR KGS
To set the resistance level in lbs
press ; to change the units to
kgs press
C
R
L
C
R
L FORCE 0.0 LBS
for less force turn
The left side resistance must be
setfirst.Theindicatorwillini-
tially show 0.0 lbs. The scroll-
ing prompt will inform you
that turning the left hand knob
counter-clockwise decreases the
resistance and turning the same
knob clockwise increases the
resistance.
LCD Operation: Setting the Resistance
10
Turn the left hand knob clockwise
half a turn to increase the resis-
tance and then extend your left
leg out twice to see the current
resistance reading on the LCD.
L
C
R
L FORCE 13.5 LBS
for less force turn
Ifyouarenotsatisfiedwiththe
level of resistance, repeat the
steps above to increase or de-
crease the resistance. Once you
aresatisfied,finishbypressing
L
L
C
R
R FORCE 0.0 LBS
for less force turn
Repeat the same steps to set the
resistance on the right side and
then press to begin the work-
out.
R
!
CAUTION
Setting the re-
sistance above
50 lbs will
result in an
error and the
LCD stopping
the workout.
!
CAUTION
Do not set
a resistance
level that is
too difficult or
painful.