PAAMON PAMCID430GT Manual - page 10
enable some of the detectors (such as sensors for door, window,
balcony, etc), and disable the others (such as sensors for the hall or
some places easy to be triggered by person at home).
Main unit Operation: Press button on keypad
Remote Control Operation: Press button on remote controller once
LCD display:
5.Disarm
The purpose of disarming the system is to let it not in alert status. One
way is normal disarming after operation of arming, and the other is to
stop the main unit alarming. After the operation of disarm, all the
defense zones except 24-hour zone shall not work.
Main unit Operation: + user password +
Remote Control Operation: Press button on remote controller
SMS operation: user password (Default: 1234) + [0]
After the setting, the panel makes "Di" "Di" sound, and you will receive
a SMS: Alarm System disarmed.
LCD display:
6.Emergency Help
Sometimes, there may be some accidents happening (a senior person
or child suddenly becoming ill or being in great pain, a fire emergency,
burglar intrusion). Press [SOS] button on keypad, or SOS button on
remote controller or wireless panic button, the main unit will alarm and
make calls to the preset user numbers.
7.Answer Alarm Call
When the main unit sounds alarm, it will dial the preset alarm center
and user phone numbers. If no one answers the call, the system will
call the next user number automatically. The system will call each
preset numbers for 3 times in order.
If you hang-up directly without answering the call, the system will call
each preset number for 3 times circularly.
If you answer the call, you will hear the pre-record voice. You can set
system via your telephone or mobile phone keypad.
Press [1]: Main unit stops alarming and Arm; the call is hung up
directly and it stops calling users.
Press [2]: Main unit stops alarming and Disarm; the call is hung up
directly and it stops calling users.
Press [3]: Turns the siren off and monitors the scene for 30 seconds.
Within the 30s, you can press 1/2/4/*. And if there's no operation for
30s, it will hang up automatically.
Press [4]: Replays the pre-recorded voice. After this operation, you
can still press 1/2/3/*.
Press [*]: Hang up the call and stops alarming.
Note: the alarm SMS number will receive alarm message: Alarm
System + zone number + alarm type.
8.Remote Control
Dial the number associated to the alarm panel by phone (mobile
phone), and after one ringing cycle, you can hear a “Di” sound. Then
press “user password A+#”. A “Di” sound indicates operation correct,
and now you can:
Press [1]: out arm; the call is hung up directly
Press [2]: disarm; the call is hung up directly
Press [3]: monitoring for 30 seconds. Within the 30s, you can press
1/2/4/*. And if there's no operation for 30s, it will hang up automatically.
Press [4]: Replays the pre-recorded voice. After this operation, you
can still press 1/2/3/*.
Press [*]: Hang up the call.
15
16
Disarm
4:46PM
01/16/13 WED
Home Arm
4:45PM
01/16/13 WED
Operation Instructions
Operation Instructions