PABX 208AC Instruction Manual - page 30
Chapter Three System Program
26
1. Allows assign same extension to different group, G1 and G2, the format is:
* 47 ABCD G1 G2 #;
2. Allows program by batch way when extensions have same format, please
refer above operating, when first time input format *47, allows continue
behind programming. Only when has any error occur during programming,
then, can use * to start a new setting;
3. Different group member can make intercom call with each other, but they
can only use CO line belong to their group (refer 3.35)
4. Call can be transferred between different group, but call pickup code is
different when pick up call between self-group or in other-group ( refer 2.6)
5. At factory default mode, the group is 0.
.
3.34 Assign All Extensions are Belong to a Group
Format : * 47 G #
G = Group number = 0 ~ 9
Example: Allows to clear previous setting by assign all extensions are belong to group 0.
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 47 0 #,
3.35 Assign Designated CO Line is Belong to a Group
Format : * 48 MN G #
MN = CO line port number = 01 ~ 16
G = Group number = 0~9
Example: Assign CO line 08, 09, 10 and 11 are belong to group 2.
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 48 08 2 # ==> 09 2 # ==> 10 2 # ==> 11 2 #
1. Different group member can only use CO lines that belong to their group,
but the call can be transferred between different groups.
5. At factory default mode, the group is 0.
3.36 Assign All CO Lines are Belong to a Group
Format : * 48 G #
G = Group number = 0 ~ 9
Example: Allows to clear previous setting by assign all CO lines are belong to group 0.
Operating: 1) Lifts extension 8001, unlock system;
2) Input * 48 0 #,