Pacific Energy neo 1.2 Installation & Operating Instructions Manual - Optional Blower
Installation Instructions
Optional Blower
The optional blower kit (WODC.EUBLOWB) is equipped with a three prong power cord and may be installed at any time.
Follow installation instructions supplied with the kit. Route power supply cord away from heater.
Electrical rating: 230 volts A.C., 50Hz, .3 amps.
Fan output rating: 140 CFM
Blower Operation
Proper blower speed matched with air control setting will ensure peak performance from your stove. Operate as follows:
• Air control set from Low to Medium Low, operate blower speed switch on "Low".
• Air control set between Medium and High, operate blower speed switch on High setting.
Automatic: To operate the blower automatically, set the rocker switch on the side of the fan housing to "Auto" and set
the speed switch to desired setting. This will allow the fan to turn on as the stove heats up to operating temperature. It
will also shut the blower off after the fire has gone out and the unit cooled to below a useful heat output range.
Manual: To manually operate the blower, set the rocker switch to "Man" and set the speed control to desired setting.
This will bypass the sensing device and allow full control of the blower. Switching from "Auto" to "Man" or selecting
speed may be done anytime.
Commissioning and Handover
Ensure all parts are fitted in accordance with the instructions.
On completion of the installation allow a suitable period of time for any fire cement and mortar to dry out, before lighting
the stove. Once the stove is under fire check all seals for soundness and check that the flue is functioning correctly and
that all products of combustion are vented safely to atmosphere via the chimney terminal.
On completion of the installation and commissioning ensure that the operating instructions for the stove are left with
the customer. Ensure to advise the customer on the correct use of the appliance and warn them to use only the recom-
mended fuel for the stove.
Advise the user what to do should smoke or fumes be emitted from the stove. The customer should be warned to use a
fireguard to BS 8423:2002 (Replaces BS 6539) in the presence of children, aged and/or infirm persons.
20
310816-24_ NEO 1.2
5055.600EU-A