Pacific Proteus 26 Operating & Maintenance Instructions - Machine Preparation
Page 6 of 17
MACHINE PREPARATION
5) BATTERY CHARGE LEVEL INDICATOR
The batteries’ indicator is digital with 4
display levels and a flashing one. The
numbers, which appear on the display, show
the approximate charge level. 4 represents
a full charge and 0 represents discharged
and the batteries must be recharged.
NOTE: The brush motor automatically
switches off after the battery indicator
light begins to flash. You will be able run
the vacuum motor and finish drying any
wet areas.
6) HANDLE BAR HEIGHT
The handle bar is adjustable into three
different positions, to adjust:
a) Release the lever (1).
b) Place the handle bar at the desired
height.
c) Release the lever and the handle bar
will lock into place.
7) SQUEEGEE ASSEMBLY
The squeegee is assembled as shown in
the figure. The squeegee lever should
be in its up position. Push on the locking
lever (1) and lock it into the post’s (2)
groove to secure the squeegee in place.
Then fit the squeegee hose into its
coupling. The hose should be located to
the right of the lifting cable.