1. DL manuals
  2. PACOM
  3. Security Camera
  4. PAC-VN70IIS-VFA12
  5. Installation Manual

PACOM PAC-VN70IIS-VFA12 Installation Manual

Manual is about: IR Night Vision Outdoor Camera

Summary of PAC-VN70IIS-VFA12

  • Page 1

    Pac-vn70iis-vfa12 ir night vision outdoor camera installation manual 1 version 1.0.1.

  • Page 2

    The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of non‐insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point wit...

  • Page 3: Installation Manual

    Table of content installation manual 1. Precautions ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4 2. Limitation of liability ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5 3. Disclaimer of warranty ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐...

  • Page 4

    1. Precautions please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Please keep the manual in good condition for your future reference and service application. Installation and services should be only carried out by ...

  • Page 5

    2. Limitation of liability this publication is provided “as is” without warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or non‐infringement of the third party's right. This publication could...

  • Page 6

    4. Package ext‐video cable x 1 camera x 1 instruction manual x 1 osd manual x 1 power + video cable x 1 tapping screws x3 plastic anchor x 3 6 version 1.0.1.

  • Page 7

    5. Special features of the model 1. Higher resolution of 600tvl(d)/650tvl(n) this unit has come up with an innovative way of increasing cubic resolution to more than 30% higher than that of conventional 600tvl cameras. It upgrades horizontal resolution to 600tvl and vertical resolution to 540tvl so ...

  • Page 8

    6. Installation 6‐1. How to mount to ceiling ① drill three screw holes on the ceiling plate to fix three anchors (supplied) in the holes. ② fix the plastic anchors in the holes. ③ position the mounting bracket on the screw points. ④ fix the mounting bracket by tightening the screws. ⑤ slightly loose...

  • Page 9

    6‐2. How to install to wall ① drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the holes. ② fix the plastic anchors in the holes. ③ position the mounting bracket on the screw points. ④ fix the mounting bracket by tightening the screws. ⑤ slightly loosen bolt (a) t...

  • Page 10

    6‐3. 3‐axis adjustment ① pan 360˚ slightly loosen pan bolt then adjust pan of the camera using a serration on the bracket and tighten the bolt firmly . ② tilt 180˚ slightly loosen tilt bolt then adjust tilt of the camera using a serration on the bracket and tighten the bolt firmly. ③ rotation 360˚ s...

  • Page 11

    - how to use connect extra video output (bnc cable) to lcd monitor as a picture. 6‐6 waterproof processing of cable end connection make sure to use a butyl tape. (do not use a sealing material on those parts) it is useful to connect the cable ends from camera to the extension cable for waterproof. C...

  • Page 12

    7. Troubleshooting if there are problems in operating, please refer to the checklist below. If the problem persists, please contact the agent where this product is purchased. Problems troubleshooting nothing appears on the screen. Please check that the power cord and line connection between the came...

  • Page 13: Troubleshooting

    Problems troubleshooting please check the polarity between rs‐485 control port and rs‐485 cable. 485 control board connection port rs‐485 control port (+)connection terminal(trx+) 485+ (‐)connection terminal(trx‐) 485‐ please check if the initial value of the rs‐485 communication setup matches betwe...

  • Page 14

    9. Specification class night vision camaera 12vdc/24vac power source 100 ㎃ (ir off) /400㎃ (ir on) ccd 1/3” sony super had Ⅱ effective pixels pal : 752(h) x 582(v) image resolution 600tvl (day) / 650tvl (night) scanning sys 2 : 1 interlace synchronization internal sync frequency pal : 15.625khz(h), 5...

  • Page 15

    Osd manual for functions control 1. On screen menu (osd) 2. Setting up the menu 1. Press the tact sw to enter . 2. Move the arrow to a specific menu by pushing the tact sw up or down. 3. Adjust the selected feature by pushing the tact sw left or right how to use osd button (tact sw) press - to enter...

  • Page 16

    Note ∙ if ‘ ‘ indication appears on a selected sub‐menu, press the tact sw to get into a following menu. ∙ if ‘ ‐‐‐ ‘ indication appears on any sub‐menu, it means the function with this mark is deactivated. (ex : when sens‐up is off, 3‐dnr becomes deactivated ‘‐‐‐‘ ) 3. Lens select the lens and adju...

  • Page 17

    Note ∙ when the shutter is set to manual mode, sens‐up does not operate. ∙ when the agc is set to off, sens‐up does not operate. (4) initial set initialize all settings of exposure menu. (5) save 5. Day / night it is used to improve the sensitivity and clarity of picture quality at low light ‐ day :...

  • Page 18

    Eclipse: can mask the head lights to view car license number plate more clearly. Can select masking color. Adjust the eclips level at the gain control as off mode. 7. White balance (white bal) this is useful to optimize the white balalnce control under a certain artificial lighting area where a stan...

  • Page 19

    8. 2d‐dnr (2d noise reduction) ‐ low ‐ middle ‐ high ‐ disabled: deactivates 2dnr. Noise is not reduced. ‐ off : activates 2dnr(level : 0). Noise is not reduced. Note > function is operated only when > is selected. 9. 3d‐dnr (3d noise reduction) the background noise in the low light level decreases ...

  • Page 20

    ‐ bad pixel: bad pixel compensation ∙ bp detection: make the screen completely black by covering the camera. ∙ search area: x start/y start/width/height . Threshold: 40 ~ 1024 . Save ( users may simply activate bp detection and go directly to save. Then bad pixels in full screen are compensated auto...

  • Page 21

    Motion (motion detection: md) ‐ zone number : you can select up to 8 md areas. ‐ zone state : determines whether to use the md area selected in zone number. ‐ width : determines the coordinate of the horizontal size. ‐ height : determines the coordinate of the vertical size. ‐ move x : determines th...

  • Page 22

    Face rec (face recognition) a special area where the internal illumination is dark while strong back light exists behind the object, normally human face becomes unrecognizable. This mode is suited for this particular situation. ‐ fr brightness : 0 ~ 40 ‐ fr contrast : 0 ~ 40 ‐ color sat : 0 ~ 200 ‐ ...