PACOM PAC-VN70IIS-VFA12 Installation Manual - page 17
Note
∙ When the SHUTTER is set to MANUAL mode, SENS‐UP does not operate.
∙ When the AGC is set to OFF, SENS‐UP does not operate.
(4) INITIAL SET
Initialize all settings of EXPOSURE menu.
(5) SAVE
5. DAY / NIGHT
It is used to improve the sensitivity and clarity of picture quality at low light
‐ DAY : The image is always displayed in color.
‐ NIGHT : The image is always displayed in black and white.
‐ AUTO1: The image is automatically converted to B/W from Color at 3 lux.
●
IR WDR LEVEL: Select Anti‐ IR saturation level ‐ OFF/LOW/MIDDL /HIGH
E
●
IR WDR ADJUST: Adjust the value in each of selected level ‐ 0 ~ 6
‐ AUTO2: The image is automatically converted to B/W from Color at 3 lux.
∙ D/N LEVEL: LOW/MIDDLE/HIGH
∙ FILTER DLY: Select the duration time about changing the Day/Night mode.
(1 SEC, 3 SEC, 5 SEC, 10 SEC, 15 SEC, 30 SEC, 60 SEC)
∙ NIGHT BURST: Burst ON/OFF selectable.
∙ INITIAL SET: Initialize all settings of AUTO2 menu.
Default setting
‐ Infrared camera: AUTO1
‐ Non‐Infrared camera: AUTO2
6. WDR/BLC/ECLPS
The image quality is greatly improved with the use of this mode when there is a
strong backlight behind the object.
‐ OFF : Deactivates the WDR function.
‐ WDR: Camera scans both of bright lit background and shaded area distinctively
under an extremely contrasted light situation. (LOW/MIDDEL/HIGH)
‐ BLC: Enables a user to directly select a desired area from a picture and
to view the area more clearly.(LOW/MIDDEL/HIGH)
‐
17 version 1.0.1