PACOM PAC-VN70IIS-VFA12 Installation Manual - page 22
FACE REC (Face Recognition)
A special area where the internal illumination is dark while strong back light exists behind the object,
normally human face becomes unrecognizable. This mode is suited for this particular situation.
‐ FR BRIGHTNESS : 0 ~ 40
‐ FR CONTRAST : 0 ~ 40
‐ COLOR SAT : 0 ~ 200
‐ CONTRAST : 0 ~ 100
‐ OUTPUT LEVEL : ‐64 ~ 64
‐ SHARPNESS : 0 ~ 100
COMM SET (Communication seting)
This function sets up the camera communication status when controlling the
camera
through an external control device.
‐ CAMERA ID
∙ CAMERA ID : Determines the camera’s identification
number (between 0 and 255).
∙ ID POSITION: Displays camera title on top left & right side of
the screen.
∙ BAUD RATE : You can select 4800/9600/19200/38400/57600 bps .
∙ SAVE/REBOOT: Select this to save the COMM SET menu setting and return to
the main screen.
∙ PREVIOUS: Return to COMM SET menu.
Note
‐ RS‐485 cable : Please connect (‐) firstly and then (+).
‐ IF there happens RS‐485 cable conection error or any other problems, a message
‘ERROR RS-485 Connection. Please Reconnect and Reboot’
is displayed
.
Please reset the power or OSD.
FACTORY RESET
Resets the camera setting to the factory defaults.
But
12. EXIT
Save all setting menus by pressing the Tact SW and then exit by pressing EXIT menu.
22 version 1.0.1