Pakedge Device & Software SW24-GBP User Manual - 3.1.
pakedgedevice&software inc. / SW24-GBP
15
pakedgedevice&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page 15 of 73
Web-Based configuration (continued)
2. Select Internet Protocol (TCP/IP) and click Properties. The Internet Protocol (TCP/IP) dialog
appears, where you can configure the TCP/IP settings of your PC.
3. Select Use the following IP Address and type the IP address and subnet mask, as in the example
above. (Be sure the IP address and subnet mask are on the same subnet as the SW24-GBP.)
4. Click OK.
5. Click OK to close the dialog, and click OK to close the Local Area Connection Properties dialog.
3.1.
Configuration
To configure the SW24-GBP using a Web browser:
1.
Type the IP address of the SW24-GBP (default: 192.168.1.201) in the address bar of the
browser and press Enter.