Pakedge Device & Software SW24-GBP User Manual - 3.1.8.
Manual is about: 24 Ports Gigabit Switch with SFP back-side cable connections and QoS prioritization
of
73
pakedgedevice&software inc. / SW24-GBP
27
pakedgedevice&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page 27 of 73
3.1.8.
Rate Limit
You can designate a data rate limit for incoming and outgoing transmissions at each port. To
configure these settings, In the navigation menu, under Configuration, click Rate Limit.
Port: You can set the incoming (Policer) rate limit and the outgoing (Shaper) rate limit for each
port.
Policer: Sets the incoming rate limit for the port. Choose a rate for the drop-down menu,
or choose NoLimit.
Shaper: Sets the outgoing rate limit for the port. Choose a rate for the drop-down menu,
or choose NoLimit.
To save your changes, click Apply