Pakedge Device & Software SW24-GBP User Manual - page 26
Manual is about: 24 Ports Gigabit Switch with SFP back-side cable connections and QoS prioritization
of
73
pakedgedevice&software inc. / SW24-GBP
26
pakedgedevice&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page 26 of 73
Quality of Service (continued)
Once you have telnet'd into the switch you will be able to run the commands to set the priority
of the ports. The switch uses four classes of high, med, normal, and low for the port
priorities. To set a port to a class you will run the command as follows:
qos default port number class
So for example if you wanted port 1 to be a high priority you would run the following
command:
qos default 1 high