Pakedge Device & Software SW24-GBP User Manual - 4.4.10.
pakedgedevice&software inc. / SW24-GBP
64
pakedgedevice&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page 64 of 73
[
class).
[
[
: VLAN ID, 1-4095 (default: 1).
4.4.9.3.
IP Mode
Syntax:
IP Mode [enable|disable]
Description:
Activate or deactivate the IP configuration.
[enable|disable]: Enable/disable IP (default: Show IP mode).
4.4.9.4.
IP Arp
Syntax:
IP Arp
Description:
Show the current content of the ARP table.
4.4.9.5.
IP DHCP
Syntax:
IP Dhcp [enable|disable]
Description:
Activate or deactivate the DHCP Protocol.
[enable|disable]: Enable/disable DHCP (default: Show DHCP mode).
4.4.10.
IGMP Snooping Commands
4.4.10.1.
Description of IGMP snooping
By default (and when enabled), IGMP snooping functions in each statically defined VLAN (i.e.,
VLANs that are stored in non-volatile configuration memory). The IGMP snooping module will
listen to IP multicast router IGMP queries and IGMP reports from hosts, and will update the
switch device MAC table with IP multicast group MAC addresses and port masks according to