PlaySafe 22-PS302 Owner's Manual - page 13
13
©2006 Pacific Cycle, Inc.
Step Illustration
Instructions
Hardware
Reference
1
Remove the hardware from the frame
attachment and connect the extension. Re-
insert the hardware and tighten.
NOTE: Be sure that the lower part of the
see-saw extension is buried and anchored
per the anchoring instructions on page 3.
Part Ref. #: PSHW10
2
Secure the frame attachment to the leg of
the frame with the hardware provided on
the leg.
NOTE: Be sure that the see-saw frame
attaches to the leg on the opposite side of
the slide. If the leg with the holes is near
the support bar with the slide attachments,
it should be moved to the other end.
Part Ref. #: PSHW10
3
Install the seats on the see-saw bar. Check
the nuts and bolts on the seat so that they
are secure.
Part Ref. #: PSHW16
4
Mount the pivot onto the frame attachment.
The pivot should be between the two screw
heads, starting with the plastic bushing and
then the metal bracket.
5
Attach the see-saw bar to the pivot using
the hardware found on the see-saw bar.
Part Ref. #: PSHW10
6
Once fully assembled, check that the see-
saw hinges freely. If it does not, make sure
that the bolts on the see-saw bar are not
overly tightened.
Part Ref. #: PSHW10