PlexiDor Electronic Pet door Owner's Manual - Types Of Installations
Types of Installations
Wall Installation:
You may build your own tunnel to finish out the interior of the cut hole, see diagram #3, or you may
purchase a Wall Tunnel Kit from your dealer. See the Plexidor
®
Electronic Pet Door template for
more instructions. If you are using a Plexidor
®
Wall Tunnel Kit see the instructions included with
the tunnel kit.
The Plexidor
®
Electronic Pet Door can be plugged in using the power cord provided, or you may
have an electrician hard wire the power cord into the wall.
Door Installation:
Follow the instructions on the template that came with your The Plexidor
®
Electronic Pet Door.
Collar
Key
Do not mount the pet door too high. Keep it low
enough for the collar key on your shortest pet to be at
or above the lower line of the Antenna Sensing Area.
Plexidor
®
Electronic Owners Manual Pg 3
Version 20100427
Example of a wall tunnel framing for a
Plexidor
T
®
Electronic Pet Door.
Upper Line of Antenna Sensing Area - 6 inches down from
the top of the black panel. Centered 3 inches in from sides.
Lower Line of Antenna Sensing Area - 2 inches up from the
bottom of the black panel. Centered 3 inches in from sides
IMPORTANT: Before any installation you must first determine the proper height positioning for the
pet door according to the diagram #2.
Diagram #2
Diagram #3