PlexiDor Electronic Pet door Owner's Manual - C O D E
Plexidor
®
Electronic Owners Manual Pg 8
Version 20100427
Matching 2 or More Plexidor® Electronic Pet Doors to Your Collar Keys:
If your pet(s) will be using 2 Plexidor
®
Electronic Pet Doors you will need to match the dip switch
settings on the code panels of the 2 Plexidor
®
Electronic Pet Doors. To do this you:
1. Remove the motor covers on both of the pet doors by squeezing the cover on both sides and
tipping the motor cover down and out.
2. Remove the panel cover screw on both of the pet doors. This screw is located just below and
to the left of the metal spring. See diagram #5. Be careful when you remove the panel cover
screw, the panel will release and fall straight down. Hold it in place with your hand and slide the
panel down slowly. Slide the panel cover down on both of the doors, exposing the green elec-
tronic controls board. Locate the code dip switches on the green board. See diagram #6. You will
flip the dip switches down or up as necessary so that both of the dip switch panels match. Note:
the dip switches are white in color.
Example:
Code Dip Switch Panel
Pet Door #2
Code Dip Switch Panel
Pet Door #1
C O D E
1 2 3 4 5 6 7 8 9 0 1 2
1
7
8 9 10 11 12
1
2 3 4
5 6
C O D E
1 2 3 4 5 6 7 8 9 0 1 2
1
7
8 9 10 11 12
1
2 3 4
5 6
Match dip switches
on the two panels.
Diagram #7