Plinkusa KVM-1008JOSD User Manual - On Screen Display Operation
On Screen Display Operation
1. OSD menu can be popped up in powered on PC port or non-powered on PC port or
empty PC port. The resolution of OSD menu is fixed to 1024X768 for non-powered on PC
port or empty PC port.
2. When you pop up the OSD menu window go through the hot key, you will see the
following small window on your monitor.
a. The 1
ST
line bar is Bank no.
b. The 2
nd
block is your PC
system name list. You will find
the system number list from
01 to 04 ( if the current box is
4 port) or from 01 to 8 (if the
current box no. is 8 port)or
from 01 to 16 (if the current
box no. is 16 port). You can
define your PC name in
maximum 8 characters. The
factory default of 16 port KVM
switch PC name is from
“SYSTEM 01”, “SYSTEM
02” ,…, “SYSTEM 16” and 8
port KVM switch is from
“SYSTEM 01”, “SYSTEM
02”,…, “SYSTEM 08”. Besides,
the sun symbol “ ☼ “ near to
the PC name represents the
PC system is powered on.
To use up arrow key “ y “ or down arrow key “ z “ to select port for destination PC name.
After you have selected the PC port already, you can press the ENTER Key to switch the
PC port you want immediately
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
To press “ INS” key for
editing PC name.
After finishing the edit, please press “ Enter “ key for saving information.
13
BANK :
1
01
SYSTEM 01
02
☼SYSTEM 02 (
03 ☼
SYSTEM 03
04 ☼
SYSTEM 04
05 ☼
SYSTEM 05
06
SYSTEM 06
07
SYSTEM 07
08 ☼
SYSTEM 08
09
SYSTEM 09
10
SYSTEM 10
11 ☼
SYSTEM 11
12 ☼
SYSTEM 12
13
SYSTEM 13
14 ☼
SYSTEM 14
15 ☼
SYSTEM 15
16
SYSTEM 16
OSD :
1 0
SEC. CHANGE PASSWORD
SCAN:
1 0
SEC. CONSOLE
ON
/OFF
ESC : QUIT
ENTER :COMPLETE
TAB : NEXT
INSERT :EDIT
©/ª: PORT SELECT
PgDn/PgUp: BANK SELECT
BANK :
1
01
SYSTEM 01
02
☼SYS█EM 02 (