PLP Bushranger Edger Owner's Manual - page 8
8
Copyright © Roy Gripske & Sons Pty. Ltd. 2012
A
A
A
A
Blade Nut and Engine
Mounting Nuts
• Check blade nut for tightness.
Blade nut torque is 39 N-m (4.0
kg-m).
• Check engine mounting nuts for
tightness. Tightening torque is 18
N-m (1 .8kg-m).
A. Blade Nut
A. Engine Mounting Nuts
Engine Cooling Fins
• Disconnect spark plug cable.
• Clean cooling fi ns on cylinder
block and head.
• Connect spark plug cable.
Air Cleaner
A clogged air cleaner restricts the
engine’s air intake, increasing
fuel consumption, reducing
engine power, and causing spark
plug fouling.
The air cleaner elements must be
cleaned and replaced.
If dirt gets through into
the engine, excessive
engine wear and possibly
engine damage will
occur.
• Remove air cleaner cover and
precleaner.
• Remove paper element.
• Wash precleaner in liquid
detergent and warm water. Let
air dry.
• Tap paper element lightly.
Brush off dust. If element is dirty,
install new element.
• Install precleaner element and
cover.
A. Air Cleaner Cover
A. Precleaner
Depth Adjustment Pins
• Clean springs of dirt.
• Put, grease on pins.
A . Pins
Blade Arm
Lubricate with grease, Wipe off
excess grease.
A. Blade Arm
MAINTENANCE AND ADJUSTMENT
A
Clogged cooling
fi ns cause severe
overheating and possible
engine damage
CAUTION
A. Cooling Fins
CAUTION
A
A
A
A
A
A
A. Paper Element
A