1 contents general instructions assembly charging instructions safe riding requirements riding instructions maintenance troubleshooting.
2 general instructions welcome to plugz…. As easy as riding a bike but easier fun we would like to thank you for buying a plugz electric bike. You are one step closer to a brand new way of commuting that is fast, fun and environmental friendly. Enjoy it...... Environmental friendly plugz electric bi...
3 assembly general assembly instructions: the front wheel; fenders; handlebar; pedals; seat post and saddle; front basket are not assembled for shipping. They can be easily mounted as follows : tools required: spanner; allen key; screwdriver front wheel: set the front wheel hub stem in the fork en...
4 handlebar / stem / headset: stem and headset come pre-assembled. Loosen the bolts on the stem, place the handlebar, center it and turn it until it is in your preferred position, tighten the stem bolts simultaneously. Align the handlebar perpendicularly to the front wheel, tighten the top stem bo...
5 assemble bottom of basket, front light (2) and bracket (3) with 2 rectangular plates (1 & 4) and 2 nuts and bolts (5). Attach attach side basket plate to head stem mounting bracket with 2 hex nut and bolts brakes: the brakes are the most important safety features on the bicycle. To minimize the ...
6 charging instructions only use the charger provided with your bike to charge the battery (never use a charger from a different model) the battery must be fully charged before the first usage or if the bike has not been used for more than 30 days step 1: turn the power switch to “off” and rem...
7 caution if you notice a strange smell, or smoke or unusually high temperature, stop the charging procedure immediately. Bring the battery and the charge to a plugz authorized dealer for service or replacement charge the battery in a dry, well ventilated area with a temperature between 32-100 d...
8 safe riding requirements wear a helmet at all times while riding your bike obey the local traffic regulations specific to this type of equipment read this owner’s manual carefully before you ride your plugz electric bike for the first time regularly check the tire pressure to facilitate pe...
9 riding instructions check list before your first ride: • check that the battery is fully charged and locked onto the frame • check the air pressure of the tires • make sure that the front and rear brakes are working properly • check the tightness of the front and rear wheels • make sure the handle...
10 special note: using the brakes frequently, causing the motor to switch on and off continuously, riding against the wind, riding uphill, riding in cold weather and carrying heavy weight will influence the performance of the battery and reduce the expected travel range. Maintenance attention before...
11 cleaning: your plugz e-bike should be cleaned with a damp sponge, avoid electrical parts (battery connection, motor (rear axle), electric cables, handlebar controls, etc.). Dry with a cloth. Do not use a steady direct stream of water form a hose to clean your bike. Use a cloth to avoid short ci...