Plum ecoSTER TOUCH Operation And Assembly Manual - page 4
4
1. General information and safety
Incorrect electrical connection between
the room panel and ecoMAX controller
may result in damage to both devices.
Assembly has to be carried out by a
qualified installer.
Use additional precautions in order to
prevent
the
effects
of
controller
malfunctions and software leading to loss
of property and dangerous consequences,
e.g. freezing of water in the hydraulic
system.
Room panel manual is a supplement for
ecoMAX controller documentation.
User should read the manual thoroughly
(we bear no responsibility for damages
caused by non-observance of this
manual).
Keep this manual for future reference.
Symbols used in this manual:
Additional tips and information.
Important information, which can be
crucial in terms of possible damage to
property or health/life threat.
Applied standard: WEEE 2002/96/EC (The
Directive on waste electrical and
electronic equipment).
2. Application
Room panel:
mainly
serves
the
function
of
programmable room thermostat
controls
the
temperature
inside
compartments in a simple way.
serves the function of an additional
control panel for the boiler controller;
displays all parameters of the boiler
controller with a touch panel or remote
screen
internal temperature sensor enables
reading and programming temperature
with an accuracy of 0.1°C.
can be programmed in 7-day cycle with
an accuracy of 0.5h which is equal to 48
changes of temperature during one day.
can operate in a set of max. 3 identical
room panels with a function of changing
parameter settings between these panels
and independent screen preview.
Room panel can be used in a household or
similar
environments
and
in
slightly
industrialized buildings.
3. Operation
3.1
Operation of the panel
Device is equipped with a screen and TOUCH
panel.
Press corresponding symbols on the screen
in order to select position from the menu.
Some of the symbols:
- selection of the main Menu;
- / + - decrease/increase the value of the
selected parameter;
/
- scroll the parameters list up/down;
- exit a chosen Menu position or cancel a
parameter setting;
- return back to the main screen;
- enter the Menu position or confirm the
setting of the selected parameter;
- Menu information concerning the
selected Menu position;