PocketWizard FlexTT5 Quick Manual - Manual Flash
Manual Flash
Advanced Wireless CLS / i-TTL
Flash on camera
1. Slide the FlexTT5
®
Transceiver onto the camera.
2. Slide the Speedlight onto the camera mounted FlexTT5 radio. Set the Zone Switch to
your desired Zone. The On Camera Speedlight will use the power level for its
corresponding zone.
3. Slide Speedlight onto remote FlexTT5 Transceiver.
Note: You need a receiving FlexTT5 for each remote Speedlight
4. Set Zone Switch (A, B, C) on remote FlexTT5. All remote i-TTL Speedlights on the
same group/zone will be treated as one zone of light.
5. Adjust flash output level compensation using the controls on the Panasonic GH4.
Note: See Panasonic Manual for Flash Power Settings
6. Make sure all your PocketWizard
®
radios are on the same channel and take pictures normally.
ISO, aperture, flash exposure compensation (FEC), and other settings will work with exposure
normally via the PocketWizard ControlTL
®
system.
Note:
Changes to camera ISO, lens zoom, etc, will not appear on remote flash LCD.