PocketWizard FlexTT5 Quick Manual - Status Led
Status LED
Normal “waiting for trigger” operation = short blink every 2 seconds.
Normal short blink color indicates battery level:
Green
Good battery
Amber
Warning – battery low
Red
Very low battery – change immediately
Steady
red
LED in sync with TEST indicates normal transmission.
(Hold for 10 seconds to teach – see Learn mode)
Short
red
blink in sync with trigger indicates normal reception.
Rapid
red
blinking when not triggering or half-pressing camera indicates error condition.
Power off the unit, reset all connections, and power back on.
Other Functions
RESET
RESET A / CHANNEL RESET:
To reset to channels programmed in the PocketWizard Utility, hold TEST on power up.
LED blinks
green
twice to indicate reset. Release TEST. Advanced features set via
PocketWizard Utility will be retained.
RESET B / FACTORY DEFAULTS:
To reset all advanced features and channels to FACTORY DEFAULTS, hold TEST on power up
for longer than 10 seconds. When LED blinks
green
4 times, release.
•
All settings may be configured using the PocketWizard Utility available from
PocketWizard.com. See the online extended documentation at wiki.PocketWizard.com
or the help text in the Utility for detailed descriptions of these settings.