PocketWizard FlexTT5 Quick Manual - Manual Flash
Remote flash with or without CLS / i-TTL flash on camera
1. Slide FlexTT5
®
Transceiver onto camera.
2.
3.
Attach ControlTL or standard PocketWizard
®
radio to studio flash.
Make sure all your PocketWizard radios are on the same channel and take pictures normally.
Note:
Manual remote flashes are not calculated as part of the TTL exposure. For proper
exposure, adjust your camera’s exposure settings, or adjust the power level directly on your
remote flash.
Use PocketWizard Utility to engage HyperSync
™
and explore faster than X-sync shutter
speeds. Visit
PocketWizard.com/support/downloads for more information.
Manual Flash
PocketWizard Accessories
Studio Flash, etc.
• AC9 AlienBees Adapter
• Sync cables for studio flash triggering using the
• PowerST4 for Elinchrom RX
P2 Remote Flash Triggering Port
• PowerMC2 for Einstein
™
E640
For more accessories, visit PocketWizard.com.