Proxicast LAN-Cell 3 User Manual - Indicators & Connections
2
Indicators & Connections
Figure 2: LAN-Cell 3 Front Panel
LABEL
LED STATE
DESCRIPTION
USB
MODEM
USB 2.0 port for 4G/3G USB modems only
USB
Flashing
USB modem is initializing
– or –
USB modem is not registered on the carrier network
– or –
There is no compatible cellular service available at the
current location
Solid
USB modem has made a connection & has been
assigned an IP address
Wi-Fi
Solid
The LAN-Cell’s internal Wi-Fi radio is enabled
OS
Solid
An internal OS error has occurred
PWR
Solid
Power is on
STAT
Flashing
Power-on Self Test is in progress (approx. 60 sec)
Solid
LAN-Cell is at normal operational status
WAN
Solid
Link Status on the wired WAN Ethernet port
Flashing
Data activity on the wired WAN Ethernet port
LAN 1-4
Solid
Link Status on the corresponding LAN Ethernet port
Flashing
Data activity on the corresponding LAN Ethernet port
EJECT
USB
Press & hold for 5 seconds and wait for LED to stop
flashing before removing a USB modem
RESET
Press & hold for 5 seconds until the STAT LED begins
to flash. Wait for STAT LED to stay on solid. This
returns the LAN-Cell to its default settings:
LAN IP = 192.168.1.1:8080
Username/Password = admin/1234
To prevent accidental resets, install the button cover
included with the Multi-Function Mounting Base