PS Audio P3 Owner's Reference Manual - page 9
4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 service@psaudio.com www.psaudio.com
7
®
Operation Guide
©2012 PS Audio International Inc. All rights reserved.
Owner’s Reference
P3
The first page available will be the System Status page. This gives a snapshot of the current status
of the P3. Here, current input/output voltage and THD readings as well as the wattage will be
displayed. The unit’s name will also be displayed (all P3s will have a default name of POWERPLANT).
Power to the entire unit can easily be cycled by clicking the ‘System Power’ button. Power to
individual zones can also be easily cycled by clicking the desired zone’s icon under ‘Zone Power’.
The next page available is the Configuration page. Here, the user is able to control some of the more
advanced features of the P3, such as changing the device name, naming the individual outlets and
changing the switch mode of the four controllable zones.
You may enter a description of your P3 to help you remember the location within your home, such
as ‘Family Room P3’.
You may label each outlet to match the device connected. Type the desired label in the text field
above each outlet.
Change the way each outlet interacts with the Master Power button by altering the switch mode as
follows:
The outlet remains on regardless of the state of the Power Button.
The outlet will follow the state of the Power Button.
The outlet will follow the state of the Power Button after a 3 second delay.
The outlet will follow the state of the Power Button after a programmed delay. Note: The Program
Delay can only be altered through the web based interfaces, the default is 3 seconds.
System Status
Configuration
Unit Name
Zone Name
Delay Mode
Always On
Switched
Delayed
Program Delay