Q-See QT SERIES User Manual - page 23
44
45
4.7 ADVANCED
In this set of commands, the user can erase all the settings, import or export data files to and from the
DVR and control who can remotely access the DVR through three submenus:
Reset, Import/Export
and
Black/White List.
PICTURE 4-29
PICTURE 4-31
RESET
Clicking on this option will open a warning
dialogue asking you to confirm that you wish to
remove all settings and reboot the system. You
must select OK to continue with the reset or hit
CANCEL to exit without changes.
BLOCK/ALLOW LIST
From here, an authorized user can control which
computer users are allowed to access the DVR.
The Block List is used to deny access to remote
computers within a certain IP address segment.
The Allow List is used to permit access by users
from select IP address segments.
EXAMPLE: You wish to block access to the DVR from computer users within the IP address segment
ranging from 196.168.000.002 to 196.168.000.004. Select the Block button and then enter the first
segment in the
IP From field and the last address within the segment in the To field. You may add
additional segments before hitting Apply to save your settings and then exiting this window.
IMPORT/EXPORT
Use this interface to export select data files to
mobile Flash drives or an external USB drive
through the backup function. Specific data files
can also be retrieved from mobile or external
storage devices and recorded onto the DVR.
PICTURE 4-30
4.8 FILE SEARCH, PLAYBACK AND MANAGEMENT
Access the recordings on the DVR, play them back and backup the recordings to an external storage
device.
NOTE! Throughout this window, if the screen resolution is VGA 800*600, the time
search interface will show a Hide button. Clicking on this button will expand or minimize
the entire interface as needed.
Four submenus appear in this section:
Time
Search, Event Search, File Management and
Image.
TIME SEARCH
Search for an event within a range of dates and times.
PICTURE 4-32
PICTURE 4-33
Select which channel you wish to search and the screen display mode. The Calendar icon in the Start
Time window allows you to select a start date. Highlighted dates indicate that there is recorded data for
those days.
The vertical column of numbers to the left of the grid are the available channels. The horizontal headings
are blocks of time within the day.
You can select which time to begin the review by entering it in the start time window or clicking on the
time grid and moving the yellow line to the approximate start time.
Clicking on the PLAY button will begin the playback from the time selected. It will also bring up a
playback toolbar allowing finer control of the playback process.
Previous
Record
Play/
Pause
Stop
Fast
Forward
Rewind
Screen Display
Mode
Volume
Hide
Tool Bar
Exit
Frame
Advance
Next
Record
Playback
Progress Bar
Zoom Color Trim Backup
Playback
Speed
>>1 X
08/19/2011 12:02:00
PICTURE 4-34